Cable identification systems
BAUR KSG 200 T
Baur
BAUR KSG 200 T
1
The KSG 200 T is for cable identification in single and multi-core cables in a cable bundle or cable loom. By using the KSG 200 T, the risk of accidentally cutting a live phase is significantly reduced. Cable identification on all types of de-energised cables.

Technical data
Transmitter
Pulse voltage: 300 V
Pulse current: Max. 180 A
Pulse sequence: 15 pulses/min
Electric strength of output: Max. 400 V, 50/60 Hz
Measurement category: CAT IV/600 V, Nominal DC or AC rms (line-to-neutral): 600 V
Protection class: II
Degree of protection: IP40
Power supply: 115/230/240 V, 50/60 Hz

Receiver
Sensor: Flexcoupler Ø 250 mm
Sensitivity with galvanic impulse coupling: 100 % at a loop resistance of 400 Ohm (I = 0.75 A)
Sensitivity with inductive impulse coupling: 100 % at a loop resistance of < 6 Ohm
Load current range: 0 A ... 199 A ± 2%, 50/60 Hz
Display: LCD display
Power supply: Automatic recharging in the holder of the transmitter
Degree of protection: IP52
Dimensions: 100 x 25 x 211 mm
Weight: 470 g

General information
Ambient temperature (operation): -10°C ... +55°C
Case dimensions: 594 x 174 x 435 mm
Weight of case with transmitter and receiver: 6,2 kg

Standard set: Receiver for KSG 200 T with flexcoupler, Transmitter for KSG 200 T, Transport case for KSG 200 T, Connection cable 2 m, with crocodile clips, Information sign, Mains supply cord 1.8 m, User manual.
Price
Add to Cart
Compare Added
Copy
Existing functions
Main features
Impulse reflection (TDR) cable fault location method

-

Measurement range
Sampling rate
Pulse width
Pulse output voltage
Propagation velocity (v/2)
Output impedance
Secondary and multiple impulse (SIM/MIM) cable fault location method

-

Surge voltage generator
System coupling module
Secondary and multiple impulse (SIM/MIM) with DC voltage cable fault location method

-

Surge voltage generator
System coupling module
Impulse current cable fault location method

-

Surge voltage generator
System coupling module
Surge voltage generator

-

Surge generator output voltage
Surge pulse energy
Generation pulse sequence
DC output voltage range
DC current output range
Cable burn down method

-

Output voltage range
Max. output current
Max. load capacity
Internal discharge resistance
Cable sheath testing and fault location

-

Cable sheath test voltage range
Output current range
Cable sheath fault prelocation methods
Voltage measurement range
Current measurement range
Audio frequency generator
Frequency range
Output power
Max. output current
Output impedance
Operating modes
Pin-pointing cable fault location method

-

Additional features
Display
Operating temperature
Internal memory
Battery supply
Interface

-

Joint location

-

Electric strength
Special accessories
TDR for cable fault location
System coupling module with SSG generator
Surge current coupling module
Insulation resistance measurement option
3-phase LV connection cable, 25 m length
3-phase LV connection cable, 50 m. length
3-phase measuring cable with connection terminals for test van installation
Universal receiver
Ground microphone
Accessories set for sheath fault location
Cable Sheath Fault Receiver
Discharge and grounding rod
Surge voltage generator (0 ... 16 kV / 500 Ws)
Surge voltage generator (0 ... 32 kV / 1100 Ws)
Surge voltage generator (0 ... 32 kV / 1500 Ws)
Surge voltage generator (0 ... 32 kV / 2000 Ws)
Surge voltage generator (0 ... 32 kV / 3000 Ws)
External auto transformer 110/230 V, 1.5 kVA
Trolley
External auto transformator 110/230 V, 3kVA
Add to Cart
Compare Added
Copy

All products, product specifications and data present in this website are subject to change without notice.

About us